Sparmax ARISM Compressor with automatic on/off switch
Sparmax MAX-4 Airbrush with 0.4mm nozzle and needle combination
Sparmax Silver Bullet Moisture Trap designed to remove water before it reaches your airbrush
Sparmax Cleaning Pot with built in airbrush holder.
The Sparmax ARISM compressor embodies the philosophy of Sparmax: raising performance and rising above expectations through continuous improvement and unwavering quality. Reliable and functionally versatile, this innovative model exceeds the performance of similar sized compressors.
With a sleek and modern design, the Sparmax ARISM compressor is aimed at airbrush enthusiasts and artists looking for a compact, yet powerful, light-weight compressor for airbrushing.
The compressor automatically turns on when you press your airbrush trigger, providing instant air, and turns the compressor off again when the airbrush is not in use.
The Sparmax ARISM compressor features:
Low maintenance, oil-less single piston air compressor
Working pressure from 0 psi to 35 psi
Auto on/off switch: 1.7/2.4 bar (25/35psi)
Airbrush bleed valve
Silver Bullet moisture trap
2M Braided hose
Detachable power cord & plug
Air flow: 13 - 15 lpm (0.46 - 0.53 cfm) at open flow
1/8 BSP outlet on compressor
Size: L19.2 x W12 x H18.5 cm (6.7"" x 4.7"" x 7.6"")
Weight: 2.6 kgs (5.7 lbs)
Voltage: 220-240V 50Hz
Noise level: 49±dB
Duty cycle: 40 minutes continuous use. After 40 minutes of continuous operation, use the On/Off Switch to turn off the unit. Allow the unit to cool for 10 - 15 minutes before turning the compressor back on.
The Sparmax MAX-4 airbrush provides exceptional performance with even the smallest compressors because it atomises well at low pressures. It has a 0.4mm needle and nozzle combination for general purpose, high paint flow spraying and wider spray patterns. The 0.4mm nozzle is ideal when spraying thicker or heavier paints whilst still obtaining a fine level of detail.
The Sparmax MAX-4 is a dual-action airbrush but can be easily converted to a Single-action airbrush with the Single-action Air Valve that is included. It also features a Pre-set Handle which limits the colour flow to avoid over-shooting and a Crown Cap allowing you to get closer to your work and thus achieve finer detail, whilst still protecting the needle.
The Sparmax MAX-4 airbrush features:
Gravity-feed with 1/4 oz (7ml) fixed cup with lid
Dual-action airbrush with Single-action valve included Ð converts the airbrush from a dual-action to a single-action airbrush (simple installation guide included)
0.4mm needle and nozzle combination for high performance, general purpose, high paint flow spraying and wider spray patterns
0.4mm nozzle suitable for thicker or heavier paints
Fine detail to 1"" (0.4mm to 25mm) spray pattern with the one size nozzle
Ergonomic handle design with a Pre-set colour flow control
Extra Crown Cap included
Cleaning brush included
Replaceable internal PTFE solvent-proof needle packing for use with solvent-based paints
2 Year Warranty
Add your delivery requirements as part of your request for a quote.
Our frequently asked questions will help you with any issues you have around our service.
Join the Discussion
Discuss the world of design & technology in our forums.
Having difficulty choosing? Find Buyers' Guides, Product FAQs and more